BOPP thermal lamination film 
  • Characteristic:good plasticity and smoothness, low density,good transparency, strong chemical resistance, suitable for low temperature lamination, stable printing ink color after laminating. BOPP thermal glossy film is high transparency and clarity, color enhancement; BOPP thermal matte film can extinction and keep the color from change.  

publications cover 
  • Eg: Magazines, Books, Paper bags, Maps, and publicity materials 
  • Eg: Wine, Food, Medicine, daily consumer goods 
  • Eg: Advertisement paper, Board, Drawing, Document, and Photos 

  • Surface layer: BOPP 
  • glue layer: EVA adhesive 
  • Thickness: GLOSSY: 25μm(12+13) 27μm(15+12) 30μm(18+12) 
  • MATTE: 27μm(15+12) 30μm(18+12) 
  • Width: 310~1880mm 
  • Length: 100~3000M 
  • Paper core: 25.4mm (1 inch),58mm(2.25inches),76mm(3 inches) 
  • BONDING: less than 2
Process Parameter: 
  • Equipment for thermal film: dry and wet film laminator 
  • lamination temperature: 95~105℃ 
  • Roller pressure: 10-20Mpa 
  • Speed: 8-20 m/min 
Directions for using BOPP thermal laminating film: 
  • Normal process temperature is 90℃-105℃, roller pressure and temperature vary with different types of paper, ink and machines. 
  • When using the film for the first time or do other treatment, try a small volume before mass laminating. 
  • Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder. 
  • Make sure put the material in a low-temperature, dry place. 

Close window